Gold Member Since 2010
Audited Supplier
Shandong Minglong Construction Machinery Co., Ltd.

Topless Tower Crane, Tower Cranes, Tower Crane manufacturer / supplier in China, offering Flattop Tower Crane (PT6516), Qtz50 (4810) Construction Equipment Topkit Tower Crane, 2 T Building Hoists with Tri-State Driver Sc200/200 and so on.

(/ )

Supplier Homepage Product Topless Tower Crane Flattop Tower Crane (PT6516)

Flattop Tower Crane (PT6516)

FOB Price: Get Latest Price
Min. Order: 1 Set
Port: Qingdao, China
Production Capacity: 4 Sets/ Month
Payment Terms: L/C, T/T
Basic Info
  • Model NO.: PT6516
  • Condition: New
  • Maximum Lifting Weight: 10t
  • Moving Type: Fixed
  • Power Source: Electric
  • Application: Construction Usage
  • Transport Package: Nude Package
  • Origin: China
  • Certification: ISO9001: 2000
  • Maximum Lifting Height: 150-200m
  • Installation: Jack-Up
  • Type: Tower Crane
  • Sling Type: Wire Rope
  • Trademark: minglong
  • Specification: ISO9001, CE
  • HS Code: 8426200
Product Description

Suitable for construction sites that are restricted, easy to install and dismantle. If present condition is restricted, truck crane can't approach closely, then flat top tower crane is the best choice.
Due to special connection method of hoisting jib, easy to dismantle jibs in the air, also can put jibs on the trucks.
Becuase small unit quality, can use tower cranes on the same construction site to install flat top tower crane. In fact, it is easy to be restricted by present condition when dismantle tower cranes, high-rise building with skirt building, because kinds of reasons, tower cranes are at skirt building, after project is completed, it is difficult to dismantle tower cranes because of skirt buildings, truck crane can't be
Close to the building, it is easy for flat top tower crane to complete the difficult job.
Usage of steel structure can be prelonged, high safety level. Due to no pulling rod, jibs of flattop tower cranes are wider than topkit tower cranes, especially height of jibs are higher, so stiffness is stronger,
Buckling deformation will be smaller. Some customers think it may be dangerous if no pulling rod, but actually, operators from abroad say that flat top tower cranes are more stable, especially when slew or
Emergency brake, flat top tower cranes are only effected by acting force from down load, is simple, topkit tower craens will also be effected by acting force from horizontal and up load. In addition, because
Different locations of trolleying car, acting forces are different at the same location of hoisting jibs that make main stressed bars are effected by pull, press alternating force, easy to crack or welding lines crack.
For flat top tower cranes, they aren't effected by alternating force from vertical and horizontal directions, improve usage life ot steel structure and safety.
Work  rank  of  whole  craneA4Work  rank  of  mechanisimsHosting  mechanismM5
Slewing  mechanismM4
Trolleying  mechanismM4
Hoisting  height(m)Free  standing=53Attached=200
Max.   load4  falls=10t            2  falls=5t
Radius(m)Max.   radius65 
Min.   radius2.5
Tip  load  (t)1.6
Hoisting  mechanismSpeedMagnificationα =2
Load  (t)≤ 2.5≤ 5
Speed  (m/  min)10050
Magnificationα =4
Load  (t)≤ 5≤ 10
Speed  (m/  min)5025
Type  of  motor  and  powerTZRSWF250M2-4/8            37kW
Slewing  mechanismSpeedType  of  motorPower
0.56r/minYTW132S-45.5kW× 2
Trolleying  mechanismSpeedType  of  motorPower
Jacking  mechanismSpeedRated  work  pressurePower
CounterweightJib  length(m)65605547.5
Weight  (t)2421.92116.5
Total  power53kW  (without  jacking  motor)
Power  supply-380V(± 5%)Frequency50HzWork  temperature- 10-40
Send your message to this supplier
Ms. Nicole Miao
Sales Manager
To: Ms. Nicole Miao

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now